為了滿足用戶的需要，裝飾用鋁板一般經過表面處理才能投放市場，所以裝飾鋁板表面處理是比較重要的，那么鋁板表面應該如何處理呢？

1、陽極氧化，20世紀50年代已引入鋁合金門窗，至今仍是鋁門窗以及裝飾鋁板常用的表面處理措施。
Anodic oxidation, has been introduced in the 1950s aluminum windows and doors, aluminum doors and windows, and is still commonly used in decorative aluminum surface treatment measures.
2、陽極氧化后電泳丙烯酸樹脂，是一種普通的油漆，直接噴涂到在清洗好后的鋁板表面上再進行過爐烘烤，其耐候性5-6年。該技術當前已由透明光亮膜發展到無光透明膜和彩色膜，品種更趨多樣化，工業控制和產品質量都比較穩定。
After electrophoresis, the anodization acrylic resin is a common paint sprayed directly on the surface of aluminum plate After further washing the furnace baking, weatherability 5-6 years. The current technology has been developed to dull the brilliant film transparent film and color film, more diverse varieties, industrial control and product quality are relatively stable.
3、化學轉化處理后靜電噴涂包括靜電粉末噴涂和靜電液相噴涂，靜電液相噴涂氟碳樹脂在20世紀60年代，美國已實現商品化。而靜電粉末噴涂熱固性聚酯涂層，60年代末在歐洲已實現商品化，當前仍是歐洲各國占優勢的表面處理手段。時至今日，單一陽極氧化的鋁門窗在國內外市場均明顯縮小日本青睞于電泳涂層，白色電泳涂層發展很快，并在歐洲得到應用。靜電粉末噴涂以其色彩多樣、控制方便、環境保護、性能優良等原因，已成為歐美的首選表面處理方法。
After the chemical conversion treatment, including electrostatic spraying liquid electrostatic powder coating and electrostatic spraying, electrostatic spraying liquid fluorocarbon resin in the 1960s, the United States has achieved commercialization. The electrostatic powder coating thermosetting polyester coating, the late 1960s has been commercialized in Europe, currently still dominated by European countries Surface treatment means. Today, a single anodized aluminum doors and windows in the domestic market were significantly reduced in favor of Japan electrophoretic coating, white electrophoretic coating developed rapidly, and has been used in Europe. Electrostatic powder coating with its various colors, easy to control, environmental protection, excellent performance and other reasons, has become the preferred method for surface treatment in Europe and America.
4、噴漆：通常是氟碳噴涂，其工藝和聚脂油漆工藝相同，只是其油漆中含有氟碳的成分，氟碳的附著力很差。所以，必須配合環氧樹脂混合使用而增加附著力，但也由于很多不良廠家偷減氟碳含量而沖擊市場。鋁板噴漆前的處理比較重要，要進行鈍化處理才能保證油漆和鋁板緊密結合，典型的用途是幕墻鋁板均采用該方式進行表面處理。
Fluorocarbon coating is usually the same as its process and polyester paint process, but the composition of its fluorocarbon paint containing fluorocarbon poor adhesion. Therefore, we must be mixed with epoxy resin to increase adhesion, but also because many manufacturers to steal less adverse impact on the market and fluorocarbon content. Treatment before painting aluminum is more important, the need for passivation to ensure the paint and aluminum closely, typical use is the way walls are made of aluminum surface treatment.

濟南鋁板：http://www.7075lu.com/