為確保濟南鋁板http://www.7075lu.com/的質量，我們需要用測量工具檢測下新出的產品，但如果這些工具遭到損壞，對濟南鋁板就起不到監(jiān)督控制作用。
1、濟南鋁板不要用油石、砂布擦磨量具表面及測量面和刻線部分，非計量檢修人員，嚴禁拆卸、改裝和擅自修理量具。量具的存放地點應保持清潔、干燥，無震動、無腐蝕性氣體，且要遠離溫度變化范圍大的地方或有磁場的地方。量具盒內存放的量具要清潔干燥，不準存放其他雜物。
Do Jinan aluminum oil stone, emery cloth and rub the surface gauges measuring surface and line section, the non-metering maintenance personnel, non-demolition, alteration and unauthorized repairs gauges. Measuring the storage location should be kept clean, dry, no vibration, no corrosive gas, and to stay away from large temperature changes of place or places where magnetic fields. Gage Gage storage box must be clean and dry, are not allowed to store other debris.
　
2、當濟南鋁板表面有毛刺時，一定要去凈毛刺，再進行測量，否則會使量具磨損，并且還會影響測量結果的準確性。不要用手摸量具的測量面，因為手上有汗液等潮濕臟物會污染測量面，使它生銹。量具不要同其他工具、及金屬物質混放在一起以免碰傷量具。
When Jinan aluminum surface burr burr must go to the net, and then measure, otherwise it would gage wear, and also affect the accuracy of the measurement results. Do not touch the gauge measuring surface, because the hands of a sweat and other moisture contamination measuring surface dirt will make it rust. Do not mix with other gauges on the instrument, and the metal material together so as not to bruise measuring tool.
　　
3、切忌把濟南鋁板卡尺的量爪尖端當作劃針、圓規(guī)或其他工具使用，不準人為扭動兩卡爪或把量具當卡板使用。
Avoid the Jinan aluminum caliper jaws as a stylus tip, compass or other tools, are not allowed to twist the two artificial jaw or the use of measuring tools when pallets.
　　
4、用完濟南鋁板http://www.7075lu.com/量具后，要擦干凈表面污漬、鋁屑，松開緊固裝置，當長期不用時，在測量面要涂防銹油。量具在不用時，要將其放入保護盒內，最好專人專職使用，并做好量具經權威單位檢測的年審記錄。
After the run Jinan aluminum gauges, to wipe clean surface stains, aluminum scrap, loosen the fastening device, when the long-term need, measure the surface to be coated in rust oil. Gage when not, to put it in a protective case, it is

best to use full-time person, and make annual record Measuring unit detected by the authority.